Antibacterial effectiveness of photo-sonodynamic treatment by methylene blue-incorporated poly(D, L-lactide-co-glycolide) acid nanoparticles to disinfect root canals.

AIM: This in-vitro investigation aimed to assess the antibacterial effectiveness of photo-sonodynamic treatment using methylene blue (MTB)-incorporated poly(D, L-Lactide-Co-Glycolide) acid (PLGA)-nanoparticles for the disinfection of root canals. METHODS: The synthesis of PLGA nanoparticles was achieved using a solvent displacement technique. The morphological and spectral characterization of the formulated PLGA nanoparticles were carried out using scanning electron microscopy (SEM) and Transformed-Fourier infrared spectroscopy (TFIR), respectively. One hundred human premolar teeth were sterilized and then their root canals were infected with Enterococcus faecalis (E. faecalis). Later, the bacterial viability evaluation of the following 5 research groups was conducted: (a) G-1: specimens treated with a diode laser; (b) G-2: specimens treated with antimicrobial photodynamic therapy (aPDT) and 50 µg/mL of MTB-incorporated PLGA nanoparticles; (c) G-3: specimens treated with ultrasound (US); (d) G-4: specimens treated with US and 50 µg/mL of MTB-incorporated PLGA nanoparticles; and (e) G-5: control group consisting of specimens that did not undergo any treatment. RESULTS: Under SEM, the nanoparticles exhibited a uniform spherical shape and were around 100 nm. The formulated nanoparticles' size was validated through zeta potential analysis utilizing dynamic light scattering (DLS). The TFIR images of both PLGA nanoparticles and MTB-incorporated PLGA nanoparticles exhibited absorption bands ranging from around 1000 to 1200/cm and nearly from 1500 to 1750/cm. The G-5 samples (control group) demonstrated the greatest viability against E. faecalis, followed by G-3 (US-conditions specimens), G-1 (diode laser-conditioned specimens), G-2 (aPDT + MTB-incorporated PLGA-nanoparticles-conditioned specimens), and G-5 (US + MTB-incorporated PLGA-nanoparticles-conditioned specimens). Significant statistical differences (p < 0.05) were observed among all research groups, including both the experimental groups and control group. CONCLUSION: The combination of US via MTB-incorporated PLGA nanoparticles exhibited the most effective eradication of E. faecalis, suggestive of a promising therapeutic modality against E. faecalis for disinfecting root canals with complex and challenging anatomy.

The adhesive strength of fiber post-to-canal dentin with Aniline green, Fotoenticine activated by PDT, green tea, and ozone as a final irrigant.

AIM: The effect of novel final disinfection protocols Malachite green (MG), Fotoenticine® (FTC), Green tea extract (GTE), and Ozonated water (OW) on the bond strength of prefabricated glass fiber posts (PGFP) adhered to canal dentin. MATERIAL AND METHOD: The canals of fifty premolars with closed apices were cleansed and obturated. The specimens were randomly assigned to one of five groups based on the final irrigant used, with the control group receiving NaOCl+EDTA and the experimental groups receiving MG, FTC, OW, and GTE. The GFP was cemented with a self-etching, dual-cure paste; the bond strength was estimated with a universal testing machine; and failure analysis was conducted with a stereomicroscope. RESULTS: The highest PBS was observed in the coronal third of Group 4 (using ozonated water as the final irrigant), whereas the lowest bond integrity was observed in the apical section of Group 2 (1.02-0.54 MPa) using Malachite green as the final irrigant. Group 1, Group 4, and Group 5 exhibited no significant difference in the bond integrity of GFP to dentin when compared to Group 2 (p>0.05). In addition, comparable bond score values were obtained for Groups 2 and 3 (p>0.05). CONCLUSION: The results of this study suggest that OW and GTE may be effective final disinfectants for root canals, as they increase the bond strength of resin-luting cement.

Software Application toward Accessible Hearing Care Assessment: Gap in Noise Test.

Currently, several methods are being applied to assess auditory temporal resolution in a controlled clinical environment via the measurements of gap detection thresholds (GDTs). However, these methods face two issues: the relatively long time required to perform the gap detection test in such settings and the potential of inaccessibility to such facilities. This article proposes a fast, affordable, and reliable application-based method for the determination of GDT either inside or outside the soundproof booth. The proposed test and the acoustic stimuli were both developed using the MATLAB® programming platform. GDT is determined when the subject is able to distinguish the shortest silent gap inserted randomly in one of two segments of white noise. GDTs were obtained from 42 normal-hearing subjects inside and outside the soundproof booth. The results of this study indicated that average GDTs measured inside the booth (5.12 ± 1.02 ms) and outside (4.78 ± 1.16 ms) were not significantly different. The measured GDTs were also comparable to that reported in the literature. In addition, the GDT screening time of the proposed method was approximately 5 minutes, a screening time that is much less than that reported by the literature. Data show that the proposed application was fast and reliable to screen GDT compared to the standard method currently used in clinical settings.

Nanoparticle incorporated dentin bonding agent to caries effected dentin treated by photodynamic therapy, laser or chlorhexidine.

PURPOSE: This study aims to evaluate the microtensile bond strength (µTBS) and failure modes of graphene nanoplatelets doped with hydroxyapatite (GNP-HA) modified self-etch dentin bonding agent (DBA) to caries effected dentin (CAD) after various conventional and laser disinfection protocols. MATERIALS AND METHODS: Graphene nanoplatelets and HA nanoparticles were doped and incorporated in DBA. Fifty carious human molar teeth were used for the experiment. CAD specimens were divided into five groups (n=10/group) into CAD undergoing no disinfection treatment (Group-CAD), 2% chlorhexidine disinfection (Group-CHX), 6% NaOCl disinfection (Group-NaOCl), methylene blue assisted PDT (Group-MB-PDT), and Er,Cr:YSGG laser application (Group-Er,Cr:YSGG). Following the respective disinfection techniques, the GNP-HA modified adhesive was applied to all treated CAD surface. Subsequently µTBS and failure modes were analyzed. RESULTS: Representative scanning electron microscope images (SEM images) of the synthesized GNP-HA indicated flakes of graphene with varying size lengthwise (>500 nm) with 1-2 nm width. The doped HA showed round and spherical morphology conjugated over the surface of the GNP measuring 40 -100 nm in diameter. CAD group that underwent no treatment represented the highest µTBS (29.43 MPa). Within the tested specimens, MB-PDT (22.37 MPa) and Er,Cr:YSGG (21.85 MPa) showed the highest µTBS values than CHX (15.69 MPa) and NaOCl (11.46 MPa). However, there was no significant difference between MB-PDT and Er,Cr:YSGG (p>0.05) and a significant difference existed between CHX and NaOCl (p<0.05). Equal distribution of cohesive and adhesive failures was noted for CAD, CHX and NaOCl treated specimens. A majority of adhesive failures existed in the MB-PDT groups. While admixed and adhesive failures were higher in Er,Cr:YSGG treated samples. CONCLUSIONS: The outcome of this study suggests that CAD restored by GNP-HA modified self-etch adhesive showed highest bond strength after MB-PDT and Er,Cr:YSGG protocols with low amount of adhesive failure.

Effectiveness of photodynamic therapy on bonding strength and failure modes of fiber-posts in c-shaped treated root canals.

AIM: The present study aimed to assess the push-out bond strength (PBS) and failure modes of fiber-posts after photodynamic therapy (PDT) and Erbium yttrium scandium gallium garnet (Er,Cr:YSGG) in c-shaped canals. METHODS: Sixty molars with c-shaped root configuration were studied. The endodontic prepared teeth specimen were equally randomized into four groups: i) photodynamic therapy (PDT); ii) Er,Cr:YSGG; iii) chlorhexidine and; iv) control group. Post root filling, 10 mm space was prepared for insertion of post in the root canals. The push-out bond strength was evaluated using Universal testing machine. Modes of failure were evaluated as adhesive, cohesive and admixed. Mean values were computed between groups using Kruskal-Wallis test followed by Bonferroni post hoc test. Comparison between two thirds of root sections were analyzed using Friedman test. P-value was set at 0.05 or less. RESULTS: Specimens treated with PDT reported the highest mean PBS (8.56 ± 2.12 MPa), while the lowest PBS was observed in NaOCl group (6.92 ± 2.21 MPa). Thirteen failures were observed at the adhesive post interface, whereas 22 failures were found at the interface forming between the dentin surface and adhesive. Similarly, 9 failures were categorized as mixed. For PDT group, a sum of 3 failures and 4 failures were noted at the apical and cervical points. CONCLUSION: The specimens treated with PDT showed the highest push out bond strength with least number of failures.in c-shaped root canals.